JLab is a renowned brand in the world of headphones and has been making quality products for years. However, sometimes even the best products can face issues, and one such problem that JLab headphone users often face is their Bluetooth headphones not turning on.

This article will look at some common reasons why JLab Bluetooth headphones not turning on and provide solutions to fix the issue.

Why JLab Bluetooth headphones not turning on: [Causes and Solutions]

Here are the causes that why won’t my jlab headphones turn on, with there solutions.

1. Dead Battery

A dead battery is the most common reason your JLab Bluetooth headphones may not turn on. If you have not charged your headphones for a long time, the battery may have drained entirely, so your headphones will not turn on.

Solution:

To solve this issue, you need to charge your JLab Bluetooth headphones. Connect the headphones to a power source using a USB cable and let them charge for at least an hour. Once the headphones have charged, try turning them on again.

2. Faulty Charger or Charging Cable

Another reason your JLab Bluetooth headphones may not turn on is a faulty charger or charging cable. If the charger or cable is damaged, it may not charge your headphones properly, which could result in a dead battery.

Solution:

You must use a different charger or charging cable to charge your JLab Bluetooth headphones to solve this issue. If you do not have another charger or cable, you can purchase a new one from JLab or any electronics store.

3. Bluetooth Connectivity Issues:

If your JLab Bluetooth headphones are not turning on, it could be due to Bluetooth connectivity issues. Sometimes, Bluetooth can fail to connect correctly, which could prevent your headphones from turning on.

Solution:

To solve this issue, you need to disconnect your JLab Bluetooth headphones from all devices they are connected to. Then, try connecting your headphones to your device again. If this does not work, try resetting your headphones by pressing and holding the power button for 10 seconds.

4. Button malfunction.

Sometimes the button of the headphone malfunction because of sweat, water and dirt, preventing headphones to turn on.

Solution:

Clean the button of the headphones for making them dust free or place them in direct sunlight for 4 mints as it may vaporise any water or sweat molecules,

5. Need a reset

Reset the Headphones If the battery and power button aren’t the problem, try resetting the headphones. 

Solution:

To do this reset, press and hold the power button and volume up button for 10 seconds. The headphones should turn off and then back on.

6. Software Issues

Sometimes, your JLab Bluetooth headphones may not turn on due to software issues. This can happen if a bug or glitch in the software prevents your headphones from turning on.

Solution:

To solve this issue, you need to update the jlab firmware:

The process for updating the firmware of your JLab Bluetooth headphones may vary depending on the specific model you have. However, in general, here are the steps you can follow:

  1. Check for updates: Visit the JLab website or download the JLab Sound App to check if there are any firmware updates available for your headphones. Make sure to select the correct model of your headphones.
  2. Download and install: If there is an update available, download the firmware update and follow the installation instructions provided by JLab. Some models may require a computer to complete the firmware update, while others can be updated directly through the app.
  3. Connect your headphones: Once you have installed the firmware update, turn on your headphones and put them in pairing mode.
  4. Connect your headphones to your device: Go to your device’s Bluetooth settings and connect to your headphones.
  5. Test your headphones: Test your headphones to ensure the firmware update was successful.

If you encounter any issues during the update process, refer to the instructions provided by JLab or contact their customer support for assistance.

7. Physical Damage:

If your JLab Bluetooth headphones are not turning on, it could be due to physical damage. If you dropped your headphones or exposed them to water or extreme temperatures, this could cause them to stop working.

Solution:

If your JLab Bluetooth headphones have physical damage, you may need to take them to a repair shop or contact JLab customer support to see if they can be repaired or replaced.

Conclusion

If your JLab Bluetooth headphones are not turning on, there could be several reasons for this issue. It could be due to a dead battery, faulty charger or charging cable, Bluetooth connectivity issues, software issues, or physical damage.

Following these solutions, you can fix most of these issues and get your headphones up and running again. If you are still experiencing problems, contact JLab customer support for further assistance.